Ab Motors
23 reviews
November 10, 2024
I have been cooperating with this organization for about 2 years. There were different moments, but everything was good from the beginning. At one point, a "jamb" occurred! I had to raise the cylinder head again in the 105th DAFa.
Before that, AB Motors changed the cups under the nozzles. The fault turned out to be this organization (they put sealing rubber bands under the wrong cups) I offered to reimburse the cost of laying the cylinder head (about $ 300) and in the future, for my part, we live as we lived. But the director preferred to sacrifice a regular customer, instead of acting like a human being!!!
The one who does nothing is not mistaken!
But the question is, how does anyone feel about their mistakes!
Good luck to you, AB Motors!
See original · Русский
June 8, 2024
They don 't do it on time .
I gave the cylinder head to repress the flaps of the colapans, three flaps were broken and they did not say, I arrived unexpectedly and only then I found out.
I bought the bags myself of good quality
When I gave it away, they said two days for everything
As a result, I waited four hours and took the cylinder head unfinished minus three boxes that are only on order.
Calls are not answered when there is a delay.
I had to give it to another service.
See original · Русский
3
March 28, 2024
There are questions about quality, but more on time, the last time the order was made for more than three weeks and the most interesting thing is that they do not take the handset from other phones, they pick it up and feed it with breakfast, we will not apply any more
See original · Русский
3
May 18, 2024
I've been working with the guys for 5 years now. They know their job , the equipment is good , the human factor failed twice , then they were sick , then they delayed the deadline
See original · Русский
December 30, 2024
they made a block, firstly, they specified one deadline and gave it 5 days later, secondly, there is no terminal, they say they can work without it, it is not fate to warn about it.
I do not recommend contacting this office.
See original · Русский
October 5, 2023
They made a head for a Mercedes Atego. You need to constantly adjust, constantly call. They do well, but 3 weeks in time is just terrible!
See original · Русский
4
March 9, 2024
The guys have gone bad. The quality is negative. Deadlines are in the negative. I will be looking for a new place
See original · Русский
1
April 28, 2024
This is not the first time I have applied. They always help. Price/Quality
See original · Русский
September 3, 2022
They did their job flawlessly. This is not the first time I have addressed the guys. And what can I say: my expectations completely coincide with reality.
Thanks for the work done!
See original
1
May 19, 2022
I gave the cylinder head to the check - grinding and washing got this result, it's not a job at all, they took money for the sink and in fact they didn't wash it, they said on the phone that they took it for pre-washing, that is, if I came and said that it wasn't necessary to wash, they would have washed it, but not it would be included in the price...
See original
1
April 14, 2023
It was fast enough
If you need it faster, they will help
See original · Русский
1
3
June 2, 2023
Just super, high-quality work, done on time)
See original · Русский
3
July 13, 2023
They are doing well , but the deadlines are not telling , the work is being delayed
See original · Русский
2
January 5, 2022
The sleeve of the 6-cylinder engine was performed. After 600km, all the casings sagged. We are currently suing the company. I do not recommend contacting you.
See original
5
May 16, 2022
I have applied several times and everything is always clear, within the agreed time frame.
See original
1
3
September 25, 2020
The machines are correct. The specialists are trained.
A rare cylinder head was made.
A rare crankshaft was made.
I gave it away at 12:00 and took the finished ones at 17:00.
I assembled the 1976 engine. The engine is running.
What other recommendations are needed?
See original
1
4
May 23, 2024
Class
See original · Русский
August 30, 2019
The horror! I delivered a block with a crack in the 1st sleeve of the BC (Kravter 2.5). The sleeve was marked when checking the BC. Upon delivery, everything was discussed with the master about eliminating air leaks from the crack and high-quality sleeve. After overloading, air leaked from the seat of the sleeve. The amount of 105 rubles was billed for the work, which I signed in the documents. When issuing the block, an amount of 205p was set, of which about 47p for the sleeve, 53p was added for the work from nowhere. They were motivated by some kind of internal order, which was not discussed with me. So: the amount is from the air, the work is not done efficiently. The air leak on this cylinder remained. They refused to remake it qualitatively under warranty. I do not recommend it! Wasted time and money!
See original
4
1
November 16, 2019
I have been working with them for more than five years. During all this time, there was only one question about quality — everything was sorted out quickly and pleasantly. Excellent workshop!
See original
1
1
December 26, 2022
Great company
See original
1
1
March 6, 2019
Repair of the cylinder head. Boring and lining of blocks. Grinding of crankshafts. On imported equipment. Many exclusive types of work
See original
2
2
February 18, 2022
Cool company
See original
October 11, 2018
Smart guys
See original
1
2