Task: check the injectors, get new ima codes, close possible problems with the injectors and look for the causes of unstable operation of the internal combustion engine.
They are not engaged in removing /installing injectors, they are sent to a third-party service. A third-party service removes, transfers to/receives from Diaghead, installs back.
Diahead checks, passes test plans, and promises to generate new ima codes.
As a result: the third-party service did everything perfectly, DiagHead checked the injectors, replaced one with a used one (tested, according to them), issued test plans, and asked for ima codes to wait. I waited for more than a month, constantly reminding myself of myself. As a result, they said that they would not be able to get new ima codes (equipment broke down).
Result:
+ : injectors are allowed;
- : there are no new codes, whether the replaced nozzle adapts, one can only guess whether the ECU corrects the operation of the injectors correctly is unknown. We need to do it all over again.
In the end: "we can't help you with anything" and the contact of another diagnostic service.
Payment for everything takes place on a third-party service because injectors are removed and installed there, so you can't show DiagHead anything. The attitude is at the level of "we did not succeed, f.. you go on by yourself."
See original · Русский
Кирилл Ковалёв
Level 8 Local Expert
December 28, 2024
Excellent service! The nozzles were repaired quickly and efficiently. Recommend 👍
See original · Русский
Дмитрий
Level 7 Local Expert
March 15, 2023
Everything is super , checked pretty quickly , explained everything , did not impose repairs . I found where to make it cheaper, eventually I came back and did it NORMALLY
See original · Русский
malashitckiy
Level 7 Local Expert
December 17, 2020
A very good place to get quality help. I passed the injectors for testing with Audi 3.0 diesel. I received comprehensive information on their condition and even the history of previous repairs. A very competent specialist with a lot of knowledge in fuel systems, a good Boshevsky stand. considering the more than loyal price tag in comparison with others, definitely contact us here on fuel issues
See original
Артур
Level 6 Local Expert
March 12, 2020
A really good place to check the nozzles, an original stand, an adequate master, will tell you everything, show you everything, a high-quality tool, very clean, the visual condition of everything is new
If repairs are required, the nozzle is made on site, spare parts are ordered, they come there, well, and actually install it.