Dinitrol

5.0

427 ratings

Rate this place

@Dovmont

Level 17 Local Expert

They signed up for maintenance a month before the scheduled date. At 11 o'clock. I handed over the car and picked it up at 5 p.m. They even washed it thoroughly. So I drove out as if from a salon. They issued a warranty card, a receipt, and a bottle of liquid to clean a possible smudge of the applied compound. By money: I paid the amount I was told when accepting the order. It is convenient that they are located close to the city center, there is no need to go to the outskirts.

See original · Русский

Алексей Рожков

Level 5 Local Expert

Good day! I arrived on the recommendation of friends for a pre-appointment at 9:00. They were processed quickly and released until the evening. Everything is clear, understandable. An hour before the car was ready, they called that the car was ready! I arrived, they issued a warranty card (4 years) with a recommendation to pass the inspection in a year +/-. I received detailed instructions on how to proceed in the next 2-3 days + special care equipment. I liked everything. I hope the car will travel for a long time through our "chemistry". Good luck and prosperity to the guys!

See original · Русский

M M

Level 7 Local Expert

One of the oldest anti-corrosion treatment companies. Dinitrol is associated only with Euromechanics :)) I have been processing their machines since 2014, from the time when we were still in the Chinese Basin area. Polite staff, they will tell and explain everything. If you need an anti-corrosion treatment of the car, I recommend it.

See original · Русский

Show business's response

Евгений Малышев

Level 8 Local Expert

I've already driven 2 cars for processing, before that I drove a KROWN. This is not a custom review, but my opinion! Dinitrol is definitely better than Crown. I've already got on a new train, it's not black on the bottom, but brownish. The layer is thick , and you don 't need to upgrade every year . You have to come to Crown every year and update it, which is not cheap. And the prices are the same. In general, my opinion is that dinitrol is more durable and more effective.…

See original · Русский

Show business's response

Андрей Климков

Level 9 Local Expert

I signed up a week before work. The prices were pleasantly surprised. Another franchise offered 50% more expensive. They do not impose additional services. They explained everything clearly. Now the main thing is that the work should be done efficiently. A month after the thief is gone. The smell went away in a week

See original · Русский

Максим Белькович

Level 5 Local Expert

Everything seems to be fine, but they forgot to process the trunk lid - the "human factor". As a result, upon repeated treatment, everything was fixed without any questions, but the sediment remained.

See original · Русский

Show business's response

Ольга Климова

Level 5 Local Expert

We did the anti-corrosion treatment of the body, everything was spilled very tightly and efficiently, all the holes were filled in, the work was completed within one day.

See original · Русский

Show business's response

Юрий Копцев

Level 5 Local Expert

I liked the attitude of the staff, I drove the car for processing, it was done on time, the price suited me, they gave me a 5-year warranty, after 2 years they told me to come for warranty service.

See original · Русский

Show business's response

Александр ТРОФИМОВИЧ

Level 4 Local Expert

The job was well done, there were many gaps, including hidden cavities, but even under protection it was too lazy to blow out

See original · Русский

Наташа Ромашкова

Level 6 Local Expert

They don't do what they have to do. The fenders are not removed... I do not recommend contacting them. It's better to buy dinitrol in cans yourself and process it yourself. It will be cheaper and better.

See original · Русский

Анатолий Тявловский

Level 13 Local Expert

I really liked it. Attentive staff, called, reminded, everything was done just fine. When I chose an anikor service, I stopped at them both in terms of reviews, quality and price - the best of all. Without a doubt, they are the best, and I will go to them for correction. Thanks guys.

See original · Русский

Show business's response

Николай Святошенко

Level 3 Local Expert

I did additional annual processing, and the five-year warranty has already ended. Everything cost 60 rubles, where it was necessary to update and additionally look at and spill the hidden cavities. In general, the guys are on top as always!

See original · Русский

Show business's response

Роман

Level 4 Local Expert

The work was done in a hurry. We missed a lot of places. The entire surface of the body is covered with a coating of mastic. I've been washing cars all day. The engine compartment was not washed, summer beetles, butterflies and dragonflies were filled with mastic. The last photos, this is what smashin became after one winter! Draw your own conclusions)

See original · Русский

Римский

Level 6 Local Expert

Quickly and efficiently!!! I definitely advise you, even the most inaccessible places will be protected.

See original · Русский

Show business's response

никита глинский

Level 10 Local Expert

For two days, the guys cleaned the bottom of my work car with a laser, it's been a couple of years, everything is fine, but unfortunately the prices for these works have changed

See original · Русский

Кирилл

Level 15 Local Expert

The planned maintenance was quickly completed. While I was processing the documents, the car had already been inspected and additionally processed by the threshold. 50 rubles and 15 minutes is all I needed. Pre-registration by phone, though not today for tomorrow or even next week. The master immediately advises clients what is worth processing and what does not make sense. So it's not just to cut down money, but the guys are trying to help save the car. Respect.

See original · Русский

Show business's response

Владимир Полтаран

Level 10 Local Expert

I've been here a few times. It's a pity that they don't develop. The CEC looks rather unpresentable. There are no complaints about the work. Antikor prices are high. Competitors offer a day of parking after processing, and then you go quietly home)

See original · Русский

Show business's response

Сергей Козлов

Level 6 Local Expert

The guys did well, they did it very quickly. After the treatment, they gave recommendations on how to operate in the first days, how to wash in the first week.

See original · Русский

м т

Level 3 Local Expert

They did anti-corrosion treatment, soiled the interior of the new car, and the body was covered in plaque

See original · Русский

Христина

Level 5 Local Expert

The quality of the guys' work is just "excellent". The antikor is gorgeous, we lifted the car on the lift when the oil was changed, the guys said that the car was treated super well! Thank you guys for your work!

See original · Русский

Андрей

Level 15 Local Expert

I made an antikor . Time will tell about the quality of the work. For now, about the customer-facing service. 1 - everything, including glass, is covered in dirty film and streaks. It took me an extremely long time to get home. The glare was terrible. The oncoming headlights were blurred all over the windshield. I stopped by your place the next day. It's already cold. I was able to talk normally). The windows were washed with chemicals again. It seems to be fine. There is also a house near the house with different chemicals . I went from Saturday to Sunday at night. This is not riding, but fidgeting. It was shining again, though not so much. The speed on the highway is 50-70 km/h instead of 90-120 km/h - oncoming cars glare through the windshield terribly. It's impossible to drive! Those who ride in passing are blinded through the side windows and rear-view mirrors- the distance is terrible and unclear, and in general, where the passing is located (((. 2- after washing, the whole car is covered in white spots. I stopped by the A-100 robot car wash. Soap is always relatively good. I gave 20 rubles . He drove out- the car was covered in white spots. I went to the car wash. Foam- wash it off. I washed it off with demineralized water, which leaves no traces. I haven't left it for a year. After you, as it dried up, so are the white spots again. 15 rubles for a self-wash down the drain. Without hesitation, I repeated the operation again - with no result. Since there was no more dust and abrasive dirt, I wiped it with a special microfiber cloth for drying. It looks like the spots are partially gone. Back to self-washing, foam-rinse-dry. After three more times, it's more or less spotless, but the glass is still greasy. Another 30 rubles have passed. How to remove this fat? He is eternal! I arrived in a car that was much cleaner than the one that was later given away. They offered to come to them . The craftsmen will wash white spirit. The time is 2 hours. But where do I get 2 hours and another hour back and forth? I have a very busy work and personal schedule! I had to spend all my free personal time (lunch, smoke breaks, etc.) washing glasses in a circle. 3- front mudguards. The front left one is loose. I looked in. And what did😂 see? Not only do they both fit loosely and bulge!😀 One self-tapping screw holds, the other is loose (it's good that it didn't fall out). I unscrewed the one that holds it, the second one fell out - there is no plastic thing into which the self-tapping screw should be screwed. I don't know where she is. You probably have some left. I made a temporary house out of a plastic construction dowel. Somehow I don't want to lose the mudguard!!. It turns out that the master saw during assembly that there was no plastic spare part and still "screwed in" the self-tapping screw. How he didn't fall out was just lucky. And the cherry on the cake!!! It's good that I got in- I found that each mudguard additionally holds on to bolts. One for each one. They are missing . I don't know where they are. You probably have some left. The two bolts under the asterisk evaporated as if they had never existed! The traces on the plastic of the mudguard were from the presence. The track is gouged from the washer, which is under the bolt. By the way, without bolts, the mudguards do not stand in their place - they bend to the side and form a large gap between the body. I put non-native bolts under the hexagon. By the way, there's a nut specially welded in the wing from the factory for this. Before your intervention, I suspect that everything was in place because the mudguards were not loose and were in place! 4- the warranty on the phone was announced in 4 years, in fact 3 years.

See original · Русский

Владимир Перейра

Level 8 Local Expert

I don't understand where the negative reviews come from? A very customer-oriented company. Yes, the record is for 2 months, but it says that the guys are loaded. In 2 days, they called back again and clarified upon arrival. We did it on time. The master receptionist is a very positive friend. He told me everything and showed me. I had a pleasant impression of the visit. I recommend.

See original · Русский

Show business's response

Дмитрий Ермакович

Level 6 Local Expert

We did everything quickly, in about 20 minutes. Just what was needed, without imposing too much, or pouring all over the bottom, no one was selling. They give a guarantee for the work.

See original · Русский

Show business's response

Eugene_by

Level 5 Local Expert

Excellent service. I signed up, arrived, and was processed. I come for an inspection every year. Everything is fine, I recommend it. If necessary, they will show and tell you and advise you on all your questions.

See original · Русский

Show business's response

Виктор Сирош

Level 6 Local Expert

I did the anti-corrosion treatment of Belgee X50 (02.06). I note the fast deadlines and friendly staff. It is too early to judge the quality of the processing itself. Among the disadvantages: the plastic cover on the rear right arch was incorrectly installed. The clips were filled with the compound, which is why they moved away from the body. As a result: paid repair at the dealer (non-warranty case).

See original · Русский

евгений к.

Level 7 Local Expert

Anywhere but here you need to rush ! Or take a chair and sit still ! Watered on top , ( where it got there ) they do not remove protection, thresholds (although they say the opposite before processing), and so on. If you decide to do a job with them..... either personal presence, or a photo of the disassembled and processed car, or climb in and check for yourself!!!!! In the opposite case, you will just throw away the money, and you will also be told to come for prevention)))) which consists in hiding traces of rust after processing them ... you will be splattered again , so that it would not be visible , they will also take money again !

See original · Русский

Илья С.

Level 4 Local Expert

I contacted the DINITROL company.BY 28.08! I was recorded and also indicated that they would send all photos of the disassembly and processing of all parts of the machine! Of course, I did not receive the photo, I lifted the car when changing the oil at the service that handles the processing! They laughed at this processing with the whole service, pointed me to places that were not processed! I called denitrol and arranged for an inspection of the car on 11/25. I arrived, the car was lifted on a lift, when I pointed out the places that had not been processed for me and the gaps in processing, I received a very interesting reaction from the master Ogorodnikov I.A. and the performer Shcherbakov A. that these are 5 kopecks, that they evaluate their work perfectly. They said that if you want to disassemble and look at the car, you pay money, and when I pointed to the processed langeron from behind and asked: Is this a processed langeron? To which I received the answer- yes! Then he pointed to the raw langeron on the opposite side, to which he heard silence! I also received an answer to why there was no photo, they said that they do not do it or do it extremely rarely! But of course all the calls were saved except for the first one, which had a record and conditions! They started processing the car on the spot, not taking into account that the car was not washed, they apparently closed all the gaps for me, but how effective is it? Probably the processing of all machines goes like this! I highly recommend it! The attitude towards the car and the customer is bestial, mistakes are not recognized, and you still have to prove something to them! I didn't disassemble the car, but I can imagine what kind of processing is under protection! Drive past it! There are 5 kopecks in the photo, of which there are 5 pieces on the car and a completely untreated spar at the back!

See original · Русский

Никита Бернацкий

Level 5 Local Expert

We drove 4 cars to the antikor, hoped that they were doing everything adequately. As a result, antikor is not made in all places on all 4 cars. Where it was necessary to remove the fenders, they just scored, apparently) they discovered the problem a month later on one car, and then decided to check the remaining 3. It turned out that it was exactly the same there, they did not bother)) they applied antikor stupidly to the plastic😅

See original · Русский

Гошко Игорь

Level 10 Local Expert

The score is 4 plus. I liked how they did it, provided that the order was only for the bottom and arches. But there are also shortcomings . Considering that the car is not new and far away . The problem areas were prepared and primed . It was said to pay attention to the subdomains and miss them. We managed, but not quite. Thermal screens are not removed or bent . At least in economy processing. But it seems to have disappeared somewhere . The leading edge of the threshold has not been processed . Neither black ointment nor the composition of ML. The place is important . There's going to be a locker there dirt. It 's just that the front lockers have been removed . I wouldn't have known. Another spar seems to have been sprayed, but it doesn't seem to have been smeared a little. I called the next day, and I was offered to come and fix the flaws. Which was done . Well done.

See original · Русский

Светлана К.

Level 2 Local Expert

I sent the car for processing at 9 a.m. As a result, when removing the wheels, 2 bolts were twisted. As they say, I arrived by car without any problems. As a result, I called a mobile tire service (30 rubles), with one wheel on 2 bolts, I carefully moved next to the service. I hardly found those who undertook to drill broken bolts (at 100 rubles per bolt). I bought new ones, screwed them in. It took 6 hours, a day spent, nerves and money. As a result, the machine has no anti-corrosion coating. I don't recommend it. Uniquely. The service must be complete.

See original · Русский

Evgeny S.

Level 2 Local Expert

I did anti-corrosion treatment. Very friendly team, everything was explained well, so that I decided whether I needed it or not. I won't say for the quality, it will be clear in a few years)). But after processing in the car, it just stinks terribly with caustic chemicals for 2 weeks already. And as the guys said, until the sun evaporates all these "excess" materials, it will stink. If I knew this nuance right away, I would hardly do this antikor.

See original · Русский

Show business's response

Екатерина Орел

Level 2 Local Expert

We performed an "anti-corrosion" service on February 28. When they started checking the obvious processing sites, they did not see any processing there. We came back, pointed the finger where it was necessary, after leaving we started checking, we did nothing back.and this was not fully viewed by the car .the administrator agrees that the work has not been completed. The price of the service is according to the price list and not according to the price list) The attitude of the management is not optimistic , customer orientation is 0 This is not the first complaint in the book of remarks About a low-quality, inadequately specified service

See original · Русский

Светлана Креер

Level 14 Local Expert

Excellent work, high quality

See original · Русский

Show business's response

Роман Корбан

Level 9 Local Expert

Excellent antikor! I am very pleased with the result

See original · Русский

Show business's response

Алексей Махортов

Level 10 Local Expert

Excellent service, the quality is always on top! I have processed several machines, I am very satisfied. I definitely recommend it!

See original · Русский

Show business's response

Сергей

Level 14 Local Expert

Great company. It is very clear that everything was told before the start of work what they would do and how. We made a photo report along the way and gave recommendations. I was satisfied with both the attitude towards the client and the quality of the work. By the way, the price tag for antikor is cheaper by almost 200byn than to make at a dealer in Minsk.

See original · Русский

Show business's response

Сергей Ермак

Level 4 Local Expert

It's okay! You can apply. It was done quickly, the car was given away even earlier than planned.

See original · Русский

Show business's response

Алексей А.

Level 8 Local Expert

Great place, good specialists. I'm already bringing my third car here.

See original · Русский

Show business's response

Сергей Шелепень

Level 5 Local Expert

I contacted them in October, the queue before the winter turned out to be impressive - they signed me up only for the end of November, they called me back the day before the appointed date. The car is made every day: you drive it in the morning, pick it up in the evening of the same day. From the point of view of service, everything is clear and friendly, payment upon arrival in the evening, a receipt, an invoice, a 3-year warranty on the coating, plus it was recorded on May 25th to check the coating, plus a nice bonus: a bottle with a solvent in case the composition leaks out of hidden cavities. In general, the guys are clearly experienced in this business and know what they are doing and how, well done

See original · Русский

Show business's response

Игорь Полубинский

Level 5 Local Expert

Excellent service station for the treatment of the bottom and hidden cavities with an anti-corrosion compound. They also give a 5-year warranty for everything.

See original · Русский

Show business's response

Саркисов В.

Level 6 Local Expert

Probably one of the best anti-corruption centers. Original Dinitrol anti-corrosion materials. The price is according to the price list without any tricks.

See original · Русский

Show business's response

Katerina_Stas Katerina_Stas

Level 3 Local Expert

Wonderful and helpful guys .I quickly examined everything and gave clear recommendations .Thanks for the service)

See original · Русский

Show business's response

Svat Pit

Level 7 Local Expert

Great company. We made a normal discount for two cars. Keep up the good work. Thanks a lot

See original · Русский

Show business's response

Евгений Гаврилюк

Level 3 Local Expert

I made antikor on BYD here, everything is high-quality, I recommend a great place for those who need anti-corrosion protection!!!

See original · Русский

Алексей К.

Level 5 Local Expert

Very qualified and helpful staff. I drove the FAW Bestune NAT train to them from the salon. Despite the antikor from the dealer (Half of the fenders were processed, and there was no trace of antikor at all behind the battery.) everything was additionally processed perfectly. I'm calm now. I advise everyone!

See original · Русский

Show business's response

Сергей Щурок

Level 6 Local Expert

I arrived at 9.00. I really liked the attitude of the master receptionist Igor Anatolyevich Ogorodnikov. We agreed on some other work with the car, agreed on the price. At 16.00 the car was ready. In my opinion, everything was done perfectly. Thanks to the whole team who worked on 05/25/2024.

See original · Русский

Show business's response

kolodinskij gеnnadij

Level 16 Local Expert

Everything was done on time and accurately. They told the car's sores, gave recommendations on operation. I am satisfied and I will come again. They work for their conscience and reputation.

See original · Русский

Show business's response

Олеся Князюк

Level 11 Local Expert

Anti-corrosion treatment of the car body. Everything is clear and understandable, you can check the work visually, it is convenient to get there, good craftsmen, reasonable prices. I recommend.

See original · Русский

Show business's response

Вадим

Level 9 Local Expert

They just fill the car with dinitrol without preparation and other things. The result after a year of operation can be viewed in the photo

See original · Русский