Search
Directions

Зов

Overview
Photos
9
Reviews
7
Features
Rating 3.4
18 ratings
Rate this place

7 reviews

By default
Елена Пестова
Level 5 Local Expert
August 1, 2024
I really did not like it, I do not advise, I ordered a kitchen and a dressing room, measurements are incorrect, assembly with errors, according to the complaint, the time is 1.5 months. The price does not match the quality. There are a lot of mistakes in everything and not the pros of their business come, they do it badly and have to be redone ... I do not recommend it. We were very disappointed with the quality and attitude to customers. I can't get through and I can't wait....
See original · Русский
1
1
Екатерина Б.
Level 5 Local Expert
December 18
I contacted the CALL company (salon at 11 Mayakovsky Street, Minsk). The designer is Inga. This is the third custom kitchen in my life, and I really wanted to try ZOV, a brand that is touted literally from "every iron." The result of the work is frustration, hassle, and complete frustration with the level of service and quality of the installation.: Technical drawing (on A5 format) — "on a whim" (photo): without size and information content, it is very difficult to compare it with the installed kitchen in the future. The installers (craftsmen) first of all requested this particular drawing and assembled the kitchen according to it. Responsibility for mistakes was shifted to me. It is not surprising that the top and bottom did not match, and the extra details remained, it is not possible to verify with the drawing. The comment of the masters: "the factory puts too much." The hood did not fit the depth of the cabinets. The depth dimensions are not specified in the project. In my other kitchen, the depth is 32 cm, and I was guided by it; here, the cabinets are 30 cm, so the hood did not get up. Designer Inga did not respond to her phone or Viber messages for almost a week during the installation days; she got in touch only after I contacted the call center. Instead of admitting a mistake, there are messages in the spirit of "it's your own fault, figure it out for yourself." The hood was never installed on time. The base is installed incorrectly, the visible gap is about 1 cm. It's elementary — if the craftsmen had installed the legs and it, respectively, 5-6 cm from the edge, everything would have been fine. Instead, they justify themselves with ridiculous arguments ("the table will fall"). (photo) The outlet for the dishwasher was moved, at the direction of the designer, behind the Blum drawer cabinet, which (as it turned out!) is closely adjacent to the wall. It is impossible to use it. Instead of a solution, the designer suggested "cutting the closet" — a week later, when she finally began to respond to Viber. Why didn't they initially suggest moving it to another drawer, knowing all the nuances of the cabinet design, which are also indicated in the drawing? The countertops are connected with a gap — the water will flow. The master's remark was only laughed at. They say we've all "sunk in." (photo). According to the documents, there should be components for the base, but a part was not installed initially. The answer of the masters is something incongruous. Bottom line: The designer does not respond on the installation days (19.11 and 20.11 – and these are her working days confirmed by the call center!), the factory sends everything to be solved with the craftsmen, and the craftsmen charge an additional 50 rubles just for coming again to correct their own mistakes. Most of the issues were fixed after a conversation with the director. But even after communicating with the director and subsequent corrections, the countertops were installed poorly. Either a gap between the countertops, or a gap from the wall. But the answer of the "masters" is "the table top is cut off at an angle of 90°, - 100%. And the gap is from the wall, because you said to remove the gap between the countertops." After such an exhaustive comment by the master, further dialogue is meaningless. And the angle is NOT 90°, between the countertops they are not convinced. (Photo) This is in 2025, when service and quality should be the standard. Here— there is a demonstration of a disgusting attitude, complete irresponsibility and incompetence. Then there will be comments from the factory – "well, you agreed," but did you offer an alternative? — no. The fact that the same "masters" will come again and justify their incompetence to everyone around (walls, ceiling, daylight...), but the corners and levels are not an authority for them – I don't want any more. And the most unpleasant thing is that I understand that in a couple of years the countertop will have to be changed. I strongly do not recommend it, it is better to find a company where the designer will be involved in the process, and the masters will be responsible for their work, and will be "friends with geometry"))) I added a photo with the distance from the walls of the hob. Due to the installation curve of the countertops.
See original · Русский
Саша А.
Level 4 Local Expert
May 31
In November 2024, the kitchen of the Zov factory was ordered through SNAGA LLC in Moscow (the company's representatives are located in AVIAPARK shopping center), the agreement is ASR0027 dated 11.11.2024. As of 05/31/2025, the kitchen has not been put into operation - 1 cabinet, 1 facade and a false panel are missing, Neither the factory is responsible for the quality of services provided, nor the representative with whom the factory works. Low quality control of intermediaries, I believe that the hands of the factory are satisfied with this. The assessment of the Factory and SNAGA LLC is negative, the recommendation is negative.
See original · Русский
2
Татьяна Гусейнова
Level 14 Local Expert
March 15, 2024
Four years ago, we ordered a Call kitchen, installed it quickly and well with Kupersberg appliances, then they made a chest of drawers for us, it was expensive, but we were satisfied. At the end of 2023, two more kitchens were ordered, the equipment was refused to be delivered to us (an order from the same dealer), they were made quickly, but the construction was not over yet, so it was stored in a warehouse. In March, one kitchen of KKV 15 began to be assembled and installed, but everything does not fit together there. The oven is angular-it is not included at all. The second kitchen KKV 16 also has a corner oven, it's scary to imagine what awaits there. If this is the first time your technologist has created such a model, let him see how others are doing. Each set of furniture cost 1 million 300,000 thousand, you can't live, cook, or admire. Perhaps my daughter has already written to you, but I can't wait. I really ask you to help, I so wanted to live beautifully. Or should I write to Lukashenko? There is no way to fix the situation. The technologist or developer wants to tear off his hands.
See original · Русский
1
2
Leo D.
Level 4 Local Expert
August 11, 2024
Ordered through SP Bukraba Victoria Leonidovna, in Gomel How does the CALL work with this office at all, quality control at the completion stage is generally zero, apparently, the support is the same There are many disadvantages, the most important of them is lying about the 15% price per installation. When the installer came, he said that this was the price only for the kitchen. I asked for the furniture in the toilet and bathroom at a very high price. 1. I finished the kitchen base myself, fixed it on 2 holders, everything was hanging out, they did it carelessly, they sawed it apparently with a grinder, the whole white kitchen was covered in black dust. 2. There were many minor flaws in the kitchen that were eliminated, but this is also time, nerves. The main thing that I did not like was that the holder for the cutlery compartment was not taken into account. In fact, a mistake at the design stage. 3. When installing the closet in the toilet, the interior of the back wall was damaged in several places. I had to fix these chips myself with artisanal plugs. 4. A floating bedside table with a countertop under the washbasin was ordered for the bath: - the facades of the boxes were brought the wrong ones (2 months of additional waiting) - they assured us that there are no short flush-mounted guides, they persuaded us to use ball bearings, which we did not want. Then I found on the wb myself that there is still a concealed mounting of this size, they did not respond to the message, called, said we would think about it. As a result, they said that if you pay, we will redo the boxes to fit the necessary guides, but like this is our joint. - after the correct facades were finally brought, after a month of use, a detachment appeared from the board next to the bathroom (see photo), there was no reaction to the message, the calls were answered 3 times, and they said that we were fools ourselves, otherwise we ordered and they will fix it. - the remark that it lasts a very long time and "I give you two weeks to fix it" was answered. A month has passed, zero reaction, let's go through the instances In general, not only do they mess up, they also lie, they are completely incompetent, I do not advise, more than six months of wasted time
See original · Русский
1
Игорь Brooks
Level 2 Local Expert
July 31, 2021
Everything is fine.
See original
1
Николай Банкевич
Level 5 Local Expert
August 29, 2020
The call is cool!!!
See original
1
  1. 1
  2. 2